SN74LS374NSRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 45pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 20 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 28ns @ 5V, 45pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 40mA |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS374NSRG4 Overview
The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. The supply voltage is set to 4.75V~5.25V. A temperature of 0°C~70°C TAis used in the operation. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74LSseries FPGA. This D flip flop should not have a frequency greater than 50MHz. In total, there are 1 elements. As a result, it consumes 40mA quiescent current. It has been determined that there have been 20 terminations. The 74LS374 family contains it. An input voltage of 5Vpowers the D latch. A device of this type belongs to the family of LS. Surface Mount mounts this electronic component. This board has 20 pins. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. The flip flop is designed with 8bits. 8 circuits are used to achieve its superior flexibility. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. An electrical current of 5V volts is applied to it. A D flip flop with 2embedded ports is available. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 24mA, it is possible to design the device in any way you want.
SN74LS374NSRG4 Features
Tape & Reel (TR) package
74LS series
20 pins
8 Bits
5V power supplies
SN74LS374NSRG4 Applications
There are a lot of Texas Instruments SN74LS374NSRG4 Flip Flops applications.
- Data Synchronizers
- Clock pulse
- Dynamic threshold performance
- Data transfer
- Patented noise
- Individual Asynchronous Resets
- Power down protection
- ESCC
- Data storage
- Digital electronics systems