SN74LS323N
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 8 |
| Family | LS |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 39 ns |
| Power Supply Current-Max (ICC) | 53mA |
| fmax-Min | 35 MHz |
| Count Direction | BIDIRECTIONAL |
| Height Seated (Max) | 5.08mm |
| Length | 24.325mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
SN74LS323N Overview
PDIP package contains the device. Taking the total number of terminations on the chip and adding them up, we get 20. The part operates at 5V voltage. Electronic components are categorized as LS. The following additional elements are important to note: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. This part should have a minimum supply voltage (Vsup) of at least 4.75V. The device is capable of delivering voltage at 5V. A maximum supply voltage (Vsup) of 5.25V may be applied to this part. There are 8 bits in the IC chip. This board has 20 pins in total. The subcategory of this item is Shift Registers. The temperature should not exceed 70°C.
SN74LS323N Features
It supplies 5V power
SN74LS323N Applications
There are a lot of Texas Instruments SN74LS323N Shift Registers applications.
- ROM Chips
- LED matrix control
- temporary data storage
- Remote control holding register
- store data in digital form
- data transfer
- Dual-rank shift, hold, and bus applications
- Flash Memory
- Interconnectors
- Delay Line