SN74LS299NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 20 |
| Weight | 1.200007g |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 39 ns |
| Turn On Delay Time | 40 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 53mA |
| Number of Input Lines | 10 |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS299NE4 Overview
As a result, PDIP package contains the embedded device. There are 20 terminations on the chip. Presented in a case of Rail/Tube. There is 5V operating supply voltage listed on the part. It is equipped with a pin count of 20. The recommended mounting method is Through Hole. There is an electronic component in the LS. A range of 5V is noted as the operating supply voltage of this chip. The following additional elements are important to note: HOLD MODE; COMMON I/O PINS. The device has 10 input lines. There is a capability to deliver voltage at 5V. There are 8 bits on the IC chip. The pin count is 20. This product should not be used at temperatures above 70°C. In order to operate the device, the value should not fall below 0°C. It is used under the 5.25V supply voltage. Voltages higher than 4.75V are used for this supply. In this device, there are 1 circuits that are active at the same time.
SN74LS299NE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS299NE4 Applications
There are a lot of Texas Instruments SN74LS299NE4 Shift Registers applications.
- temporary data storage
- Pulse Extenders
- Remote control holding register
- store data in digital form
- Pattern Recognizers
- Parallel to serial converter
- Delay Line
- LED matrix control
- Flash Memory
- 7-segment display control