SN74LS299DWE4
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 39 ns |
| Turn On Delay Time | 40 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 53mA |
| Number of Input Lines | 10 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
SN74LS299DWE4 Overview
This device can be found embedded within the package SOIC. Taking the total number of terminations on the chip and adding them up, we get 20. A Rail/Tube case holds it. This part has an operating supply voltage of 5V. 20 pins are located on the device. Using Surface Mount as a mount point is recommended. The electronic component belongs to the LS. This chip's operating supply voltage is reported as 5V. There are also the following additional considerations in this section: HOLD MODE; COMMON I/O PINS. A device with 10 input lines is available. There is a capability to deliver voltage at 5V. A total of 8 bits are present on the IC chip. In total, there are 20 pins on it. Under temperatures below 70°C, it is recommended to use it. For this device to operate, it cannot be lower than 0°C. Under 5.25V, this voltage is employed. It is important to note that this supply voltage is higher than 4.75V. In this device, there are a total of 1 circuits.
SN74LS299DWE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS299DWE4 Applications
There are a lot of Texas Instruments SN74LS299DWE4 Shift Registers applications.
- 8-bit data storage
- Flash Memory
- Output expansion
- Remote control holding register
- Remote control holding register
- Parallel to serial converter
- Cache memory in CPU
- ROM Chips
- Data manipulation
- Counter