SN74LS195AJ
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-GDIP-T16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 26 ns |
| Power Supply Current-Max (ICC) | 21mA |
| fmax-Min | 30 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Package / Case | CDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
SN74LS195AJ Overview
Embedded in a package of type CDIP, the device is available for use. The number of the chip's terminations sums up to 16. Parts with a 5V operating supply voltage are specified. An electronic component is included in the LS. This section has the following additional features: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT. For this part, Vsup should not be less than 4.75V. A voltage of 5V can be delivered by it. In this part, the maximum supply voltage (Vsup) should not exceed 5.25V. IC chips contain a total of 4 bits. The total number of pins is 16. Temperatures higher than 70°C should not be used.
SN74LS195AJ Features
It supplies 5V power
SN74LS195AJ Applications
There are a lot of Texas Instruments SN74LS195AJ Shift Registers applications.
- Cache memory in CPU
- Dual-rank shift, hold, and bus applications
- Flash Memory
- ROM Chips
- Counter
- Delay Line
- 7-segment display control
- store data in digital form
- Remote control holding register
- temporary data storage