SN74LS166ANE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CLOCK INHIBIT |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 35MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS166ANE4 Overview
PDIP is the package in which the device is embedded. 16 is the total number of terminations on the chip. There is a Rail/Tube case containing it. There is 5V operating supply voltage listed on the part. On this part, there are 1 elements. It has 16 pins. As a general recommendation, mounting by Through Hole is recommended. This electronic component is classified as LS. 5V is noted as the operating supply voltage of this chip. This section has the following additional features: CLOCK INHIBIT. This device has 9 input lines available. A voltage of 5V can be delivered by it. IC chips contain a total of 8 bits. It has a total of 16 pins. It is recommended that it be used at temperatures below 70°C. This device should not be operated with a value lower than 0°C. It is employed under the condition of 5.25V. This supply voltage is employed higher than 4.75V. Its subcategory belongs to Shift Registers. This device operates at a frequency of 35MHz.
SN74LS166ANE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS166ANE4 Applications
There are a lot of Texas Instruments SN74LS166ANE4 Shift Registers applications.
- Flash Memory
- data manipulation
- Serial to parallel converter
- Counter
- Remote control holding register
- Serial-to-parallel data conversion
- Pattern Recognizers
- Parallel to serial converter
- Cache memory in CPU
- Delay Line