SN74LS164NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | GATED SERIAL INPUTS (A AND B) |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Number of Bits | 8 |
| Propagation Delay | 32 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Number of Output Lines | 8 |
| fmax-Min | 36 MHz |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS164NSRG4 Overview
As a result, SOP package contains the embedded device. Chip terminations add up to 14. It is used to pack in Tape & Reel (TR) case. The part operates at 5V voltage. 14 pins are provided on the device. It is recommended to mount by Surface Mount in order to get the best results. There is an electronic component in the LS. Additionally, this section contains the following: GATED SERIAL INPUTS (A AND B). There should be no less than 4.75V supply voltage (Vsup) for this part. In this device, there are 2 input lines. The device is capable of delivering voltage at 5V. IC chips contain a total of 8 bits. There are a total of 14 pins on it. It should be used below 70°C. It should not be lower than 0°C to operate this device. A voltage of 5.25V is used to supply this voltage. There are 8 output lines to operate. This device has 1 circuits.
SN74LS164NSRG4 Features
With 14 pins
It supplies 5V power
With 8 output lines
SN74LS164NSRG4 Applications
There are a lot of Texas Instruments SN74LS164NSRG4 Shift Registers applications.
- Output expansion
- Generate time delay toward digital circuits
- data manipulation
- Data Processors
- store data in digital form
- Remote control holding register
- Delay Line
- LED matrix control
- Serial-to-parallel data conversion
- data transfer