SN74LS164DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | GATED SERIAL INPUTS (A AND B) |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 36 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| fmax-Min | 36 MHz |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS164DG4 Overview
There is a SOIC package embedded with the device. 14 is the number of terminations on the chip. 5V is the operating supply voltage of the part. 1 elements are present in this part. Devices with 14 pins are available. It is recommended to mount by Surface Mount in order to get the best results. There is an electronic component in the LS. It's noted that the chip's operating supply voltage is in the range 5V. This section has the following additional features: GATED SERIAL INPUTS (A AND B). In the device, there are 2 input lines that are available for use. It can deliver voltage at 5V. It has a total of 14 pins. It should be used below 70°C. Ideally, it should not fall below 0°C. It is used under the 5.25V supply voltage. This supply voltage is employed higher than 4.75V.
SN74LS164DG4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS164DG4 Applications
There are a lot of Texas Instruments SN74LS164DG4 Shift Registers applications.
- Data Processors
- Output expansion
- Sequence generator
- 8-bit data storage
- Serial-to-parallel data conversion
- ROM Chips
- data transfer
- Remote control holding register
- Pulse Extenders
- Pattern Recognizers