SN74LS109ADR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | INVERTED K INPUT |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 33MHz |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 13 ns |
| Family | LS |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Schmitt Trigger | No |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS109ADR Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.75V~5.25Vis used as the supply voltage. Temperature is set to 0°C~70°C TA. It belongs to the type JK Typeof flip flops. FPGAs belonging to the 74LSseries contain this type of chip. Its output frequency should not exceed 33MHz. 16terminations have occurred. You can search similar parts based on 74LS109. It is powered from a supply voltage of 5V. Devices in the LSfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. Due to its superior flexibility, it uses 2 circuits. This D flip flop is well suited for TR based on its reliable performance. In order for the device to operate, it requires 5V power supplies. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 8mA, it is possible to design the device in any way you want. The number of input lines is 5. It is also characterized by INVERTED K INPUT.
SN74LS109ADR Features
Tape & Reel (TR) package
74LS series
16 pins
5V power supplies
SN74LS109ADR Applications
There are a lot of Texas Instruments SN74LS109ADR Flip Flops applications.
- Safety Clamp
- Frequency Dividers
- Balanced 24 mA output drivers
- Latch
- Common Clocks
- Patented noise
- ESD performance
- Latch-up performance
- Convert a momentary switch to a toggle switch
- Shift registers