SN74LS107ANSR
| Parameters | |
|---|---|
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS107 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 45MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 15 ns |
| Family | LS |
| Logic Function | Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 6mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 15pF |
| Trigger Type | Negative Edge |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 6mA |
| Number of Input Lines | 4 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
SN74LS107ANSR Overview
14-SOIC (0.209, 5.30mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. Differentialis the output configured for it. This trigger uses the value Negative Edge. Surface Mountis occupied by this electronic component. A supply voltage of 4.75V~5.25V is required for operation. It is operating at 0°C~70°C TA. This D latch has the type JK Type. It belongs to the 74LSseries of FPGAs. A frequency of 45MHzshould be the maximum output frequency. It consumes 6mA of quiescent current without being affected by external factors. Currently, there are 14 terminations. It is a member of the 74LS107 family. Power is provided by a 5V supply. An electronic device belonging to the family LScan be found here. There is an electronic component mounted in the way of Surface Mount. The 14pins are designed into the board. It has a clock edge trigger type of Negative Edge. The part is included in FF/Latches. Using 2 circuits, it is highly flexible. Considering the reliability of this T flip flop, it is well suited for TR. The D latch runs on a voltage of 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It offers maximum design flexibility with its output current of 8mA. A total of 4input lines have been provided.
SN74LS107ANSR Features
Tape & Reel (TR) package
74LS series
14 pins
5V power supplies
SN74LS107ANSR Applications
There are a lot of Texas Instruments SN74LS107ANSR Flip Flops applications.
- Consumer
- Individual Asynchronous Resets
- Reduced system switching noise
- Pattern generators
- Computers
- Modulo – n – counter
- QML qualified product
- Data transfer
- Asynchronous counter
- ESD performance