SN74HSTL16919DGGR
| Parameters | |
|---|---|
| Independent Circuits | 1 |
| Number of Output Lines | 18 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74HSTL |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74HSTL16919 |
| Pin Count | 48 |
| Output Type | Standard |
| Circuit | 9:18 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Nominal Supply Current | 100mA |
| Output Current | 24mA |
| Number of Bits | 9 |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 50mA |
| Turn On Delay Time | 1.9 ns |
| Family | TTL/H/L |
| Logic Function | D-Type, Latch |
| Output Characteristics | SERIES-RESISTOR |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
SN74HSTL16919DGGR Overview
48-TFSOP (0.240, 6.10mm Width) contains it. It is packaged in the way of Cut Tape (CT). It uses Standard as the output. There is a logic type of D-Type, Addressable associated with this electrical device. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 3.15V~3.45V. It operates at 0°C~70°C degrees Celsius. It is a type of FPGA belonging to the 74HSTL series. The design of this electronic part contains 9 bits. A device such as this has 48 terminations designed. It belongs to 74HSTL16919 family. The device is operated when the supply voltage is set to 3.3V. 48 pins are available on it. In the world of electronics, this electronic device belongs to the family of TTL/H/L. There are 48 pins on it. The electronic part is mounted using the Surface Mount method. Subcategory FF/Latches includes this part. It reaches 3.45V when the supply voltage (Vsup) reaches maximum. A total of 3.3V power supplies are required for it to operate. An electronic circuit can be found on 9 input lines. Due to its 24mA output current, it offers maximum design flexibility. There are 18 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 50mA current from its quiescent state without being affected by external factors at all. Its superior flexibility is achieved by using 2 circuits.
SN74HSTL16919DGGR Features
48-TFSOP (0.240, 6.10mm Width) package
74HSTL series
9 Bits
74HSTL16919 family
48 pin count
48 pins
3.3V power supplies
SN74HSTL16919DGGR Applications
There are a lot of Texas Instruments SN74HSTL16919DGGR Latches applications.
- TV Set-top Boxes
- OC-48 communication systems
- Serial Output Data Queuing
- Serial Input
- Decade counting
- Parallel data storage
- Counter
- Storage
- Ring counter
- Parallel Input