SN74HCT574PWRG4
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 40MHz |
| Propagation Delay | 53 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 47ns @ 5.5V, 150pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 27000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
SN74HCT574PWRG4 Overview
It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74HCT series. There should be no greater frequency than 40MHzon its output. In total, it contains 1 elements. There is 8μA quiescent consumption. Currently, there are 20 terminations. The object belongs to the 74HCT574 family. Power is provided by a 5V supply. A JK flip flop with a 3pFfarad input capacitance is used here. This D flip flop belongs to the family of HCT. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. Flip flops designed with 8bits are used in this part. In order to achieve its superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. The system runs on a power supply of 5V watts. The D flip flop is embedded with 2ports. The supply voltage should be maintained at 5V for high efficiency.
SN74HCT574PWRG4 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT574PWRG4 Applications
There are a lot of Texas Instruments SN74HCT574PWRG4 Flip Flops applications.
- Modulo – n – counter
- Set-reset capability
- Single Up Count-Control Line
- Control circuits
- Balanced Propagation Delays
- Single Down Count-Control Line
- Storage registers
- Shift registers
- Supports Live Insertion
- ATE