SN74HCT273PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 37MHz |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HCT273PWG4 Overview
It is packaged in the way of TSSOP. In total, there are 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The power supply voltage is 5V. It is a member of the HCTfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. A reliable performance of this D flip flop makes it well suited for use in TUBE. In order for the device to operate, it requires 5V power supplies. If high efficiency is desired, the supply voltage should be kept at 5V. There is -4mA output current at the high level. A 4mAvalue is set for low-level output current. Temperatures below 85°Care ideal for operating. The operating temperature should be higher than -40°C. It is powered by 4.5V as its minimum supply voltage. There is a maximum supply voltage of 5.5V. It is possible to achieve 37MHz frequencies. The logic IC it uses is D FLIP-FLOP. It is equipped with 1 Functions . The JK flip flop has a pin count of 20.
SN74HCT273PWG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74HCT273PWG4 Applications
There are a lot of Texas Instruments SN74HCT273PWG4 Flip Flops applications.
- Supports Live Insertion
- Count Modes
- Dynamic threshold performance
- Instrumentation
- High Performance Logic for test systems
- Set-reset capability
- Memory
- Common Clocks
- Power down protection
- Buffer registers