SN74HC74QDRG4Q1
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
SN74HC74QDRG4Q1 Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Differential. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~6V volts. Currently, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. The Automotive, AEC-Q100, 74HCseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 60MHz. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74HC74 family. The D flip flop is powered by a voltage of 5V . The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as HC/UH. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latch. There is a 6Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 2 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. Optimal efficiency requires a supply voltage of 5V. There are 1 output lines on it. It consumes a total of 4μA quiescent current at any given time.
SN74HC74QDRG4Q1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
14 pins
SN74HC74QDRG4Q1 Applications
There are a lot of Texas Instruments SN74HC74QDRG4Q1 Flip Flops applications.
- Pattern generators
- Computers
- Clock pulse
- Single Up Count-Control Line
- ESD protection
- Count Modes
- Patented noise
- Set-reset capability
- Frequency Divider circuits
- Data storage