SN74HC74NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 1 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC74NSRE4 Overview
SOPis the way it is packaged. There is an embedded version in the package Tape & Reel (TR). D latch consists of 2 elements. 14terminations have occurred. The power source is powered by 5V. The electronic device belongs to the HC/UHfamily. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. For high efficiency, the supply voltage should be set to 5V. As of now, there are 4input lines. A -5.2mAvalue is set for the high level output current. Low level output current is set to 5.2mA. A temperature below 85°Cis recommended for operation. In order for the system to operate properly, the temperature should be higher than -40°C. Despite its minimal supply voltage of 2V, it is capable of operating. 6Vis its maximum supply voltage. 60MHzis the maximum frequency that can be achieved. This logic IC is D FLIP-FLOP. It is equipped with 2 Functions . It is equipped with 14 pins. This flip flop features a maximum design flexibility due to its output current of 5.2mA.
SN74HC74NSRE4 Features
Tape & Reel (TR) package
14 pins
2 Functions
14 pin count
SN74HC74NSRE4 Applications
There are a lot of Texas Instruments SN74HC74NSRE4 Flip Flops applications.
- Counters
- Bus hold
- Shift registers
- Storage Registers
- Communications
- Parallel data storage
- 2 – Bit synchronous counter
- Computing
- High Performance Logic for test systems
- Power down protection