SN74HC595PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595PWRG4 Overview
This device can be found embedded within the package 16-TSSOP (0.173, 4.40mm Width). A total of 16 terminations can be found on the chip. Presented in a case of Tape & Reel (TR). A voltage of 5V is specified for the part's operating supply. Devices with 16 pins are available. Mounting by Surface Mount is recommended. Electronic components are categorized as HC/UH. Mounted in the same way as Surface Mount. A temperature range of -40°C~85°C is used for operation. The voltage supplied to it is within the range of 2V~6V. The 74HC series represents this electrical component. A 74HC595 family can be used to search for similar parts. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There should be no less than 2V supply voltage (Vsup) for this part. There are 1 input lines available in the device. Voltage can be delivered at 2/6V by the device. In this part, the maximum supply voltage (Vsup) should not exceed 6V. There are 9 output lines to operate. There is a TR packaging for the part.
SN74HC595PWRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC595PWRG4 Applications
There are a lot of Texas Instruments SN74HC595PWRG4 Shift Registers applications.
- Output expansion
- Pattern Recognizers
- Remote control holding register
- 8-bit data storage
- Serial to parallel converter
- Interconnectors
- Flash Memory
- temporary data storage
- Data manipulation
- Sequence generator