SN74HC595N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Manufacturer Package Identifier | N (R-PDIP-T) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Propagation Delay | 250 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| fmax-Min | 29 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595N Overview
This device can be found embedded within the package 16-DIP (0.300, 7.62mm). This chip has a total termination count of 16. Tube is the case in which it is packed. Its operating supply voltage is rated at 5V. 1 elements are present in this part. 16 pins are available on the device. Through Hole is recommended for mounting. In this case, the electronic component belongs to the HC/UH. The component is positioned in the way of Through Hole. There is a temperature range of -40°C~85°C. There is a votage of 2V~6V provided with it. The 74HC series contains this electrical component. A 74HC595 family can be used to search for similar parts. In terms of supply voltage, this chip operates within the range of 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, the minimum supply voltage (Vsup) should not be less than 2V. A voltage of 2/6V can be delivered by it. 6V Vsup is the maximum supply voltage (Vsup) for this part. There are 10 output lines to operate. There is a quiescent current of 8μA running through it. An electronic device such as this one has 4 circuits in it.
SN74HC595N Features
With 16 pins
Mounted in Through Hole type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
SN74HC595N Applications
There are a lot of Texas Instruments SN74HC595N Shift Registers applications.
- Parallel to serial converter
- Data Format Converters
- Flash Memory
- Pseudo Random Pattern Generator
- Generate time delay toward digital circuits
- Output expansion
- Counter
- Cache memory in CPU
- data transfer
- Serial to parallel converter