SN74HC595DWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 419.998185mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595DWRE4 Overview
The device is embedded in 16-SOIC (0.295, 7.50mm Width) package. Chip terminations add up to 16. It is packed in a case number Tape & Reel (TR). A voltage of 5V is specified for the part's operating supply. The device is equipped with 16 pins. Surface Mount is recommended for mounting. In this case, the electronic component belongs to the HC/UH. The component is positioned in the way of Surface Mount. -40°C~85°C is the range of operating temperatures for the device. The voltage supplied to it is within the range of 2V~6V. In this case, the electrical component belongs to the series 74HC. A 74HC595 family can be used to search for similar parts. 5V is noted as the operating supply voltage of this chip. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. Ensure that Vsup is not less than 2V when powering this part. This device has 1 input lines available. Voltage can be delivered at 2/6V by the device. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. It is necessary to operate 9 output lines. TR is used to package the part.
SN74HC595DWRE4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC595DWRE4 Applications
There are a lot of Texas Instruments SN74HC595DWRE4 Shift Registers applications.
- data manipulation
- Flash Memory
- Serial to parallel converter
- Data Format Converters
- 8-bit data storage
- Delay Line
- Serial-to-parallel data conversion
- Output expansion
- store data in digital form
- Remote control holding register