SN74HC595DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| fmax-Min | 29 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC595DRE4 Overview
Embedded in a package of type 16-SOIC (0.154, 3.90mm Width), the device is available for use. A total of 16 terminations can be found on the chip. Tape & Reel (TR) is the case in which it is packed. Parts with a 5V operating supply voltage are specified. On this part, there are 1 elements. It has 16 pins. It is recommended to mount by Surface Mount in order to get the best results. In the HC/UH series, the electronic component belongs. There is a component mounted in the way of Surface Mount on this board. -40°C~85°C is the operating temperature range. During operation, the voltage is within the range of 2V~6V. The 74HC series is associated with this electrical component. A 74HC595 family can be used to search for similar parts. This chip's operating supply voltage is reported as 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, the minimum supply voltage (Vsup) should not be less than 2V. It can deliver voltage at 2/6V. It should not exceed 6V in terms of the supply voltage (Vsup). A total of 10 output lines need to be operated. This device contains 4 circuits. TR is the way the part is packaged.
SN74HC595DRE4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Packing Method : TR
SN74HC595DRE4 Applications
There are a lot of Texas Instruments SN74HC595DRE4 Shift Registers applications.
- data transfer
- Data Format Converters
- LED matrix control
- temporary data storage
- 8-bit data storage
- 7-segment display control
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- Data Processors
- Data manipulation