SN74HC594DG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 185 ns |
| Turn On Delay Time | 185 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 9 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC594DG4 Overview
SOIC is the package in which the device is embedded. It sums up to 16 where the chip's terminations add up. There is 5V operating supply voltage listed on the part. 1 elements make up this part. It has 16 pins. The recommended mounting method is Surface Mount. An electronic component is included in the HC/UH. In terms of supply voltage, this chip operates within the range of 5V. A total of 8 bits are present on the IC chip. This board has 16 pins in total. Using it below 125°C is recommended. It should not be less than -40°C when operating this device. It is employed under the condition of 6V. Voltages higher than 2V are used for this supply. Operation is available on only 9 output lines. There is a TUBE package for the part.
SN74HC594DG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
Packing Method : TUBE
SN74HC594DG4 Applications
There are a lot of Texas Instruments SN74HC594DG4 Shift Registers applications.
- Counter
- Flash Memory
- data transfer
- data manipulation
- Data Processors
- Pulse Extenders
- Data manipulation
- LED matrix control
- Sequence generator
- Generate time delay toward digital circuits