SN74HC590AD
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RCO OUTPUT; REGISTERED OUTPUTS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 380 ns |
| Turn On Delay Time | 380 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 24MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC590AD Overview
This device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. It is configured with 16terminations. This device is fully flexible due to the supply voltage of [0]. 1 elements are interconnected in wires. A total of 16pins are available on all components. Tubeis used to package it. Circuit components are connected with 16pins. To mount it, use the method of [0]. It emerges as a member of HC/UH family. With its 74HCseries designation, it can be used for a range of applications. A logic type of Binary Counter is adopted. In this case, the operating temperature should be set to -40°C~85°C. In this case, it is mounted with a Surface Mounttype. In the case of a supply voltage of [0], it operates more reliably. The array contains elements containing 8bits each. The result may be yesin terms of Pbfree code. This electronic device is equipped with the following features [0]. Its base part number, [0], contains more related parts. Voltage from the voltage source is [0]. To operate, it requires a supply voltage of [0]. The minimum supply voltage (Vsup) is 2V. It operates with the frequency of 40MHz. It is possible to reach a maximum supply voltage of 6VV (Vsup).
SN74HC590AD Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz
SN74HC590AD Applications
There are a lot of Texas Instruments SN74HC590AD Counters & Dividers applications.
- MULTIPLICATION
- DIVISION
- Time Out Timer for Consumer-Application Industrial Controls
- SQUARING
- Programmable binary and decade
- Frequency dividers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Programmable decade counters
- Digital multiplexing and demultiplexing
- Timing applications