SN74HC574NSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 40MHz |
| Propagation Delay | 265 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 31ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 0.066 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC574NSR Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas the output. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74HC series. A frequency of 40MHzshould not be exceeded by its output. There are 1 elements in it. A total of 20terminations have been recorded. D latch belongs to the 74HC574 family. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. 20pins are included in its design. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The flip flop is designed with 8bits. There is a 6Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. Its flexibility is enhanced by 8 circuits. Considering its reliability, this T flip flop is well suited for TR. A total of 2/6V power supplies are needed to run it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 7.8mA, this device offers maximum design flexibility. This input has 3lines. It consumes 8μA current.
SN74HC574NSR Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
SN74HC574NSR Applications
There are a lot of Texas Instruments SN74HC574NSR Flip Flops applications.
- Registers
- Set-reset capability
- ESCC
- Balanced Propagation Delays
- Digital electronics systems
- Guaranteed simultaneous switching noise level
- Computers
- Instrumentation
- Synchronous counter
- Counters