SN74HC573AQPWRQ1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 23 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 53 ns |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74HC573AQPWRQ1 Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. A package of Tape & Reel (TR) has been used. In this configuration, the output is set to Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Surface Mount method. A 2V~6V voltage supply is required for operation. During operation, the temperature is set at -40°C~125°C. In the Automotive, AEC-Q100, 74HC series, this FPGA is located. The design of this electronic part is based on 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74HC573 family. A 5V voltage supply is required for operation. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of HC/UH. The pin configuration of the device is 20. It is mounted according to the Surface Mount method. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. The maximal supply voltage (Vsup) reaches 6V. There are 2/6V power supplies required for this machine to operate. A supply voltage (Vsup) greater than 2V is required. Considering the reliability of this device, it would be a good candidate for TR. Input lines are converted into binary equivalents by 8 output lines.
SN74HC573AQPWRQ1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
SN74HC573AQPWRQ1 Applications
There are a lot of Texas Instruments SN74HC573AQPWRQ1 Latches applications.
- Frequency
- Automotive ADAS
- Registers
- Parallel data synchronization
- Shift right register
- Data acquisition
- Decade counting
- Ring counter
- Parallel Output
- BCD counting