SN74HC541N
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC541 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Number of Bits | 6 |
| Propagation Delay | 28 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Buffer, Non-Inverting |
| Prop. Delay@Nom-Sup | 29 ns |
| Control Type | ENABLE LOW |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC541N Overview
Logical driver uses a neat 20-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74HC series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the HC/UH family, the electric component belongs. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74HC541" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. 6 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. It is sufficient to make 8 outputs. The fundamental operation of logical driver is based on 8 circuits.
SN74HC541N Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
SN74HC541N Applications
There are a lot of Texas Instruments SN74HC541N Buffers & Transceivers applications.
- Wireless communication
- Remote controls
- Car radio
- Laser diode bonding
- Automation systems
- Precision geodetic measurement
- Wireless teaching
- IP cameras
- Broadcast application
- Fiber distributed data interface (FDDI)