SN74HC4852DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4852 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Load Capacitance | 50pF |
| Nominal Supply Current | 2μA |
| Number of Bits | 4 |
| Propagation Delay | 38 ns |
| Turn On Delay Time | 47.5 ns |
| Family | HC/UH |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 100 ns |
| Output Polarity | TRUE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Power Supply Current-Max (ICC) | 0.01mA |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 22pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 39ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4852DRG4 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. A total of 16 terminations have been recorded. Turning on and running the electrical part should be easy with a 3V voltage supply. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. The circuits in this analogue multiplexer number 2. Try searching with 74HC4852 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 195Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. A cost-effective Single supply type analogue multiplexer. 2V is the lowest voltage the electrical component should receive. An operating current of 2μA would be sufficient for this switch device. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. The electrical component supports 8 inputs. A analog switch ics with 4 outputs is included. It conducts in a 4-bit manner.
SN74HC4852DRG4 Features
Switch Circuit: SP4T
2μA Supply Current
4-Bit
SN74HC4852DRG4 Applications
There are a lot of Texas Instruments SN74HC4852DRG4 Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- High-Voltage
- PCMCIA cards
- Audio and video routing
- Modems
- Channel Banks
- Digital cross connects (DSX-1)
- DVD-R
- Battery Powered Instruments
- Multi-Line E1 Interface Cards