SN74HC4851DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4851 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 2μA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 22pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Normal Position | NC |
| Signal Current-Max | 0.05A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4851DRE4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. In total, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. A 1 circuit is present in this switch device. Try searching with 74HC4851 if you're looking for variants. Internally, this switch multiplexer has a resistance of 195Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. The digital multiplexer has a low cost Single supply. A low voltage of 2V should be applied to the electronic component. 2μA current would be enough for this multiplexer to operate. This analogue multiplexer requires a voltage of 2V~6V when it drains from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. In order to operate the 8 inputs, there are several steps to follow.
SN74HC4851DRE4 Features
1 Channels
2μA Supply Current
SN74HC4851DRE4 Applications
There are a lot of Texas Instruments SN74HC4851DRE4 Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Data switching
- Fiber to the Home
- PCMCIA cards
- Isolation
- Multi-Line E1 Interface Cards
- Sample hold systems
- Battery Powered Systems
- Industrial
- High speed data transmission line cards