SN74HC4020PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 53MHz |
| Base Part Number | 74HC4020 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 12 |
| Load Capacitance | 50pF |
| Propagation Delay | 190 ns |
| Turn On Delay Time | 190 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 14 |
| Prop. Delay@Nom-Sup | 32 ns |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 33MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC4020PW Overview
This device is supplied in the 16-TSSOP (0.173, 4.40mm Width) package. This configuration uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. In wires, 1elements are connected. The total number of component pins is 16. As a result, it is packaged as Tube. To connect the circuit's other components, there are 16pins. Using [0], it can be mounted. In this case, it appears as a member of the HC/UH family. Due to its membership in the 74HCseries, it is suitable for a variety of applications. The logic type of Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. Providing a supply voltage of 2V~6Vallows it to operate more reliably. There are 14 bits stored in each element of the array. The result may be yeswhen expressing the result in Pbfree code. Among its base part number [0], you will find additional parts that are related. In this case, 2/6Vvoltage is generated by the voltage source. The device requires a supply voltage of [0]. There is 2V minimum supply voltage (Vsup) for this device. With a frequency of [0], it operates. It is possible to supply voltages up to 6V volts (Vsup). In order to configure its basis, 12channels are used.
SN74HC4020PW Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4020PW Applications
There are a lot of Texas Instruments SN74HC4020PW Counters & Dividers applications.
- LINEARIZATION
- Divide-by-N counting
- ALGEBRAIC COMPUTATION
- Analog multiplexing and demultiplexing
- POWER COMPUTATION
- Digital multiplexing and demultiplexing
- Decade counter/decimal decode display (CD4017B）
- Binary counter/decoder
- DIVISION
- Fixed and programmable counters greater than 10