SN74HC374NS
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC374 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 70MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 31ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 290 ns |
| Count Direction | UNIDIRECTIONAL |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC374NS Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. In this case, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. There should be no greater frequency than 70MHzon its output. The list contains 1 elements. It consumes 8μA of quiescent A total of 20terminations have been recorded. This D latch belongs to the family of 74HC374. Power is provided by a 5V supply. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the HC/UHfamily are electronic devices. This part is included in FF/Latches. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 2V. In light of its reliable performance, this T flip flop is well suited for TR. An electrical current of 2/6V volts is applied to it. A D flip flop with 2embedded ports is available.
SN74HC374NS Features
Tube package
74HC series
2/6V power supplies
SN74HC374NS Applications
There are a lot of Texas Instruments SN74HC374NS Flip Flops applications.
- Circuit Design
- Cold spare funcion
- QML qualified product
- Bus hold
- EMI reduction circuitry
- Digital electronics systems
- Memory
- Convert a momentary switch to a toggle switch
- Divide a clock signal by 2 or 4
- High Performance Logic for test systems