SN74HC373PWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| High Level Output Current | 7.8mA |
| Low Level Output Current | 7.8mA |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC373PWTE4 Overview
The package in which it is embedded is named TSSOP. Tape & Reel (TR) is the packaging method. It is designed with 8 bits. A device with this design has 20 terminations. With a supply voltage of 5V, it operates. The device is equipped with 20 pins. This electronic device belongs to the family of HC/UH. This board has 20 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. There is a subcategory of FF/Latches for this part. Its reliable performance makes it an excellent choice for TR. The superior flexibility of this circuit can be attributed to the use of 8 circuits. 7.8mA is set as the low level output current. 7.8mA is the high level output current. The operating temperature should be lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. The supply voltage is limited to 6V. In order for the machine to operate, the supply voltage must be 2V. There is a logic IC that it uses that is a BUS DRIVER. As the output current is 7.8mA, the design flexibility is maximum.
SN74HC373PWTE4 Features
TSSOP package
8 Bits
20 pin count
20 pins
SN74HC373PWTE4 Applications
There are a lot of Texas Instruments SN74HC373PWTE4 Latches applications.
- Counters
- Frequency
- Double bus register system
- Multi-line decoders
- PCs and Notebooks
- Motor Drives
- Multistage ripple counting
- Hammer
- Programmable binary
- Shift register