SN74HC273PWT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC273PWT Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~6V volts. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74HCseries contain this type of chip. A frequency of 60MHzshould not be exceeded by its output. A total of 1 elements are present. It consumes 8μA of quiescent current without being affected by external factors. The number of terminations is 20. The object belongs to the 74HC273 family. The power supply voltage is 5V. This T flip flop has a capacitance of 3pF farads at the input. An electronic device belonging to the family HC/UHcan be found here. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 2V. The superior flexibility is achieved through the use of 8 circuits. Due to its reliability, this T flip flop is well suited for TR. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It offers maximum design flexibility with its output current of 5.2mA. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Additionally, it is characterized by DUMMY VAL.
SN74HC273PWT Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
SN74HC273PWT Applications
There are a lot of Texas Instruments SN74HC273PWT Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Synchronous counter
- Memory
- Circuit Design
- Registers
- Bus hold
- Patented noise
- Balanced 24 mA output drivers
- Power down protection
- Load Control