SN74HC273PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC273PWRG4 Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. T flip flop uses Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74HCseries contain this type of chip. You should not exceed 60MHzin the output frequency of the device. The element count is 1 . This process consumes 8μA quiescents. Terminations are 20. If you search by 74HC273, you will find similar parts. The power source is powered by 5V. JK flip flop input capacitance is 3pF farads. It is a member of the HC/UHfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. There are 20pins on it. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The flip flop is designed with 8bits. The maximal supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Due to its reliability, this T flip flop is well suited for TR. A power supply of 2/6Vis required to operate it. If high efficiency is desired, the supply voltage should be kept at 5V. The 5.2mA output current allows it to be designed with the greatest amount of flexibility. The number of input lines is 8. DUMMY VALis also one of its characteristics.
SN74HC273PWRG4 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
SN74HC273PWRG4 Applications
There are a lot of Texas Instruments SN74HC273PWRG4 Flip Flops applications.
- Frequency division
- Clock pulse
- Patented noise
- Digital electronics systems
- 2 – Bit synchronous counter
- Shift Registers
- Single Down Count-Control Line
- Buffer registers
- Storage registers
- Set-reset capability