SN74HC257PWR
| Parameters | |
|---|---|
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 26 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
SN74HC257PWR Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.Multiplexer is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2V~6V, designers are provided with a greater degree of flexibility.Multiplexers from the 74HC series can be used in a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The part number for 74HC257 can be used to find its logic switch related parts as well.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.It is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of HC/UH.The multiplexer ic provides 2 bits.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).Avoid unnecessary failures by keeping Vsup at 6V.For the turn signal switch's operation, there are 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.In this multiplexer, there is a total of 8 inputs.TR is used to package the switches.Transmission is carried out over 4 channels in the turn signal switch's circuit.
SN74HC257PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
SN74HC257PWR Applications
There are a lot of Texas Instruments SN74HC257PWR Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Automatic Monitoring systems
- Data demultiplexing
- A/D converters
- To select different task for memory in microprocessor memory systems
- Arithmetic Logic Units
- Make half adder
- Idle motor
- CPU memory location identification
- To select different devices in microprocessor input