SN74HC174DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 50MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 6 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| fmax-Min | 29 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HC174DG4 Overview
SOICis the packaging method. A total of 1 elements are present. Currently, there are 16 terminations. Power is provided by a 5V supply. Electronic devices of this type belong to the HC/UHfamily. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. It has a clock edge trigger type of Positive Edge. The part is included in FF/Latches. A reliable performance of this D flip flop makes it well suited for use in TUBE. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. A -5.2mAis set for the high level output current. There is 5.2mA output current at the low level. A temperature below 85°Cshould be used for operation. Ideally, the operating temperature should be higher than -40°C. It is powered by 2V as its minimum supply voltage. In this case, it supports a maximum supply voltage of 6V. It is possible to achieve 50MHz frequencies. D FLIP-FLOPis used as the logic IC in this D flip flop. As a result, it is equipped with 1 functions . A total of 16 pins are present on this device. In addition to its maximum design flexibility, the output current of the flip flop is 5.2mA.
SN74HC174DG4 Features
16 pins
1 Functions
16 pin count
SN74HC174DG4 Applications
There are a lot of Texas Instruments SN74HC174DG4 Flip Flops applications.
- ATE
- Digital electronics systems
- Clock pulse
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Frequency Dividers
- Power down protection
- Shift Registers
- Matched Rise and Fall