SN74HC166DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HC166DBRE4 Overview
The device is embedded in SSOP package. The number of the chip's terminations sums up to 16. The case Tape and Reel contains it. This part has an operating supply voltage of 5V. A total of 1 elements can be found on this part. It has 16 pins. The recommended mounting method is Surface Mount. Electronic components fall under the category of HC/UH. A range of 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: SISO OPERATION ALSO AVAILABLE. This device has 9 input lines available. The total number of IC chip bits is 8. 16 pins are on it. Temperatures below 85°C are recommended for use. This device should not be operated with a value lower than -40°C. We use this supply voltage under 6V. It is used at a higher voltage than 2V. There is a subcategory of it called Shift Registers.
SN74HC166DBRE4 Features
With 16 pins
Operate supply voltage at 5V
SN74HC166DBRE4 Applications
There are a lot of Texas Instruments SN74HC166DBRE4 Shift Registers applications.
- ROM Chips
- Generate time delay toward digital circuits
- Remote control holding register
- Serial to parallel converter
- Data manipulation
- LED matrix control
- data manipulation
- Serial-to-parallel data conversion
- Pulse Extenders
- Parallel to serial converter