SN74HC166DBR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC166 |
| Function | Parallel or Serial to Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 32 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC166DBR Overview
Embedded in a package of type 16-SSOP (0.209, 5.30mm Width), the device is available for use. A total of 16 terminations can be found on the chip. Tape & Reel (TR) is the case in which it is packed. Its operating supply voltage is rated at 5V. A total of 1 elements can be found on this part. The device is equipped with 16 pins. It is recommended to mount by Surface Mount in order to get the best results. There is an electronic component in the HC/UH. This component is mounted in the way of Surface Mount. There is a range of temperatures -40°C~85°C for operation. There is a votage of 2V~6V provided with it. Similar parts can be found using the 74HC family. Similar parts can be found by searching for the 74HC166 family. This chip's operating supply voltage is reported as 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. For this part, Vsup should not be less than 2V. A device with 9 input lines is available. A voltage of 2/6V can be delivered by it. It should not exceed 6V in terms of the supply voltage (Vsup). TR is the way the part is packaged.
SN74HC166DBR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
It supplies 2/6V power
Packing Method : TR
SN74HC166DBR Applications
There are a lot of Texas Instruments SN74HC166DBR Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Pseudo Random Pattern Generator
- Output expansion
- Remote control holding register
- Sequence generator
- LED matrix control
- Data manipulation
- Remote control holding register
- Serial-to-parallel data conversion
- Data Processors