SN74HC166AIPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CLOCK INHIBIT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC166 |
| Function | Parallel or Serial to Serial |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 32 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC166AIPWRG4Q1 Overview
16-TSSOP (0.173, 4.40mm Width) package contains the device. 16 is the number of terminations on the chip. Tape & Reel (TR) is the case in which it is packed. Voltage rating of the part is 5V. In this device, there are 16 pins. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the HC/UH. Mounted in the same way as Surface Mount. -40°C~85°C is the range of operating temperatures for the device. Voltages within 2V~6V are supplied to the device. In the Automotive, AEC-Q100, 74HC series, this electrical component is found. If you use the 74HC166 family, you can find parts that are similar. It's noted that the chip's operating supply voltage is in the range 5V. Additionally, this section contains the following: CLOCK INHIBIT. This part should have a minimum supply voltage (Vsup) of at least 2V. The device has a total of 9 input lines. Voltage can be delivered at 2/6V by the device. In this part, the maximum supply voltage (Vsup) should not exceed 6V. TR is the way the part is packaged. 1 outputs are present on this part.
SN74HC166AIPWRG4Q1 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
It supplies 2/6V power
Packing Method : TR
SN74HC166AIPWRG4Q1 Applications
There are a lot of Texas Instruments SN74HC166AIPWRG4Q1 Shift Registers applications.
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Counter
- Cache memory in CPU
- Interconnectors
- Output expansion
- Parallel to serial converter
- Sequence generator
- Pattern Recognizers