SN74HC165N
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 10mA |
| Propagation Delay | 190 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 190 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC165N Overview
16-DIP (0.300, 7.62mm) is the package in which the device is embedded. The number of the chip's terminations sums up to 16. A Tube case is used to pack it. There is 5V operating supply voltage listed on the part. A total of 1 elements are present on this part. It is equipped with a pin count of 16. The recommended mounting method is Through Hole. In this case, the electronic component belongs to the HC/UH. Mounting of this component is indicated by Through Hole. -40°C~125°C is the range of operating temperatures for the device. There is a votage of 2V~6V provided with it. The 74HC series contains this electrical component. If you use the 74HC165 family, you can find parts that are similar. A range of 5V is noted as the operating supply voltage of this chip. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAILABLE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. 9 input lines are available on the device. A voltage of 2/6V can be delivered by it. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. As a result, it runs at a quiescent current of 8μA.
SN74HC165N Features
With 16 pins
Mounted in Through Hole type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
Quiescent Current at 8μA
SN74HC165N Applications
There are a lot of Texas Instruments SN74HC165N Shift Registers applications.
- Data Processors
- 7-segment display control
- Parallel data
- Remote control holding register
- Data Format Converters
- data transfer
- data manipulation
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion