SN74HC164PWRE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC164PWRE4 Overview
As a result, 14-TSSOP (0.173, 4.40mm Width) package contains the embedded device. There are 14 terminations on the chip. There is a Tape & Reel (TR) case containing it. 5V is the operating supply voltage of the part. 1 elements make up this part. It is equipped with a pin count of 14. Using Surface Mount as a mount point is recommended. The electronic component belongs to the HC/UH. Its mounting method is Surface Mount. A temperature range of -40°C~125°C is used for the operating environment. Votage within the range of 2V~6V is supplied. The 74HC series contains this electrical component. By using the 74HC164 family, you can find similar parts. A range of 5V is noted as the operating supply voltage of this chip. Taking note of the following additional details: AND-GATED SERIAL INPUTS (A AND B). There should be no voltage less than 2V at the minimum supply voltage (Vsup). In the device, there are 2 input lines that are available for use. Vsup cannot exceed 6V for this part. There is a TR package for the part.
SN74HC164PWRE4 Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
Operate supply voltage at 5V
Packing Method : TR
SN74HC164PWRE4 Applications
There are a lot of Texas Instruments SN74HC164PWRE4 Shift Registers applications.
- temporary data storage
- Dual-rank shift, hold, and bus applications
- data transfer
- Output expansion
- Sequence generator
- Cache memory in CPU
- Parallel to serial converter
- Counter
- ROM Chips
- Serial-to-parallel data conversion