SN74HC158PWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HC158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 33 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | INVERTED |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC158PWR Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.The package is packaged in accordance with Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When operated with a 2V~6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74HC series.This configuration includes 16 terminations as part of its basic functionality.As its base part number is 74HC158, logic switch can also be used to find its related parts.The multiplexer's system is powered by 5V voltage.There are 16 component pins in this turn signal switch.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.There are 16 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The HC/UH family includes the logic switch.In this signal multiplexer, there are 2 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.The maximal supply voltage (Vsup) should be kept at 6V to avoid some unnecessary failures.The turn signal switch has 1 outputs designed for operation.A multiplexer such as this has 8 inputs available.The switches package is packaged in a way which is consistent with TR.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
SN74HC158PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74HC158PWR Applications
There are a lot of Texas Instruments SN74HC158PWR Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- Time division multiplexing system
- Microprocessor instruction decoding
- Microprocessor input/output systems
- Electronically controlled engine system
- Analog to digital conversion
- Speed synchronization of multiple motors in industries
- Injectors
- Code converters
- Implementing boolean functions with multiple variables