SN74HC153PWT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HC153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 38 ns |
| Family | HC/UH |
| Number of Inputs | 8 |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC153PWT Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility using digital controlled switch when it works with 2V~6V voltage.Since they are members of the 74HC series, they can be used in a wide variety of applications.As parts of its basic configuration, 16 terminations are desgined.To find signal switch's related components, a base part number of 74HC153 may also be used.The multiplexer is supplied with 5V voltage.Signal switch has 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.Currently, it is configured with 16 pins.It is positioned in the direction of Surface Mount.Among the family of HC/UH the logic switch is a member.Signal multiplexer consists of 4 bits.Vsup should be kept at 2V to prevent some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 6V.As part of the operation of this turn signal switch, there are 1 outputs.This multiplexer has 8 inputs.According to TR, the switches is packaged.A total of 2 transmission channels are available in the turn signal switch's circuit.
SN74HC153PWT Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74HC153PWT Applications
There are a lot of Texas Instruments SN74HC153PWT Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Paper plants
- Automatic Monitoring systems
- Data collection system
- Data distribution
- Microprocessor memory systems
- Enabling different rows of memory depending on address in memory chips
- Memory chips
- High-performance memory systems
- Recording transmission