SN74HC109DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74HC109DT Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Differential. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type JK Type. This type of FPGA is a part of the 74HC series. You should not exceed 60MHzin the output frequency of the device. There is a consumption of 4μAof quiescent energy. Currently, there are 16 terminations. It is a member of the 74HC109 family. Power is provided by a 5V supply. Its input capacitance is 3pFfarads. An electronic device belonging to the family HC/UHcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 16 pins. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. As soon as 6Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its flexibility is enhanced by 2 circuits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. In order to achieve high efficiency, the supply voltage should be maintained at 5V. As a result of its output current of 5.2mA, it is very flexible in terms of design. It has 3 output lines to operate. In addition, you can refer to the additinal DUMMY VAL of the D latch.
SN74HC109DT Features
Tape & Reel (TR) package
74HC series
16 pins
SN74HC109DT Applications
There are a lot of Texas Instruments SN74HC109DT Flip Flops applications.
- Patented noise
- Count Modes
- Shift registers
- Balanced 24 mA output drivers
- Clock pulse
- Balanced Propagation Delays
- Memory
- Data Synchronizers
- Counters
- Registers