SN74GTLPH16912VR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLPH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74GTLPH16912 |
| Pin Count | 56 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Supply Voltage-Min (Vsup) | 3.15V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Output Current | 50mA |
| Number of Bits | 18 |
| Propagation Delay | 5.7 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Max I(ol) | 0.05 A |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL/P & LVTTL |
| Height Seated (Max) | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74GTLPH16912VR Overview
There is an embedded version of it in the 56-TFSOP (0.173, 4.40mm Width) package. It is packaged in a way that resembles Tape & Reel (TR). A 18-Bit-circuit is used to provide its superior flexibility. This electrical device is of the Universal Bus Transceiver logic type. I have mounted this electronic part in the way of Surface Mount in this way. There should be a temperature difference between -40°C~85°C and the operating temperature. High/Low output currents allow 24mA 24mA to have a maximum design flexibility. An FPGA belonging to the 74GTLPH series is a type of FPGA. Using 3.15V~3.45V as a supply voltage, it operates. It belongs to the 74GTLPH16912 family. It is also possible to terminate a transmission line with a 56 termination, which is where the transmission line is closed with a device that matches the characteristic impedance of the transmission line. In order to function normally, the supply voltage should be higher than 3.3V. The 56 pin count is provided. It is designed with 18 Bits. Termination with a 2 termination matches the characteristic impedance of the transmission line. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. 56 pins are used in its design. There is a maximum voltage supply (Vsup) reached when 3.45V is reached. In general, Vsup should be higher than 3.15V. It is configured with a trigger that uses POSITIVE EDGE. The device's reliability makes it well suited for TAPE AND REEL. In terms of design flexibility, 50mA features a high output current. There is a supply voltage of 3.3V that is used to power this electrical part.
SN74GTLPH16912VR Features
56-TFSOP (0.173, 4.40mm Width) package
74GTLPH series
74GTLPH16912 family
56 pin count
56 pins
SN74GTLPH16912VR Applications
There are a lot of Texas Instruments SN74GTLPH16912VR Universal Bus Functions applications.
- Digital system
- Residual current/leakage current protection
- Reactive power compensation function
- Embedded system
- Electric car
- VCR
- Alarm circuit using LDR
- Data transfer
- Safety thermostat
- Roof distributed power station