SN74GTLPH1612DGGR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74GTLPH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74GTLPH1612 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Output Current | 100mA |
| Number of Bits | 18 |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 7.7 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Universal Bus Transceiver |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Power Supply Current-Max (ICC) | 45mA |
| Translation | GTL/P & LVTTL |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74GTLPH1612DGGR Overview
It is embedded in the 64-TFSOP (0.240, 6.10mm Width) package. In the way of Cut Tape (CT), it is packaged. In order to achieve this superior flexibility, 18-Bit circuits are used. This electrical device has a logic type of Universal Bus Transceiver, which means that it is a logic device. As you can see from the image, this electronic component is mounted in a Surface Mount-direction. It is recommended that the operating temperature be higher than -40°C~85°C. High/Low output currents allow 24mA 24mA to have a maximum design flexibility. An FPGA belonging to the 74GTLPH series is a type of FPGA. It operates at a voltage of 3.15V~3.45V. It is a member of the 74GTLPH1612 family. The 64 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. It is important to keep the supply voltage above 3.3V for normal operation. There are a total of 96 pins on this device. With 18 Bits, you can design electronic parts in a very flexible way. Transmission lines are terminated with 2 terminations, which are devices matching the line's characteristic impedance. This electronic part is mounted in the way of Surface Mount. It has 64 pins. Upon reaching 3.45V, the maximum supply voltage (Vsup) is reached. There are 1 elements in it. There is a trigger configured with POSITIVE EDGE. Based on its reliable performance, this device is most suitable for TAPE AND REEL because of its robust design. As a result of the output current 100mA, this device offers maximum design flexibility. There is a supply voltage of 3.3V that is used to power this electrical part.
SN74GTLPH1612DGGR Features
64-TFSOP (0.240, 6.10mm Width) package
74GTLPH series
74GTLPH1612 family
64 pin count
64 pins
1 elements
SN74GTLPH1612DGGR Applications
There are a lot of Texas Instruments SN74GTLPH1612DGGR Universal Bus Functions applications.
- Television
- Microcontrollers
- Car
- Printer IC
- Digital system
- Overvoltage and undervoltage protection
- Urban rail vehicle
- Memory
- Industrial Controls
- Mobile caravan