SN74GTL16612DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TRANSLATES BETWEEN GTL LEVELS AND LVTTL OR 5V TTL LEVELS |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 95MHz |
| Pin Count | 56 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Nominal Supply Current | 120mA |
| Current - Output | 64mA |
| Number of Bits | 18 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 12μA |
| Turn On Delay Time | 7.4 ns |
| Family | GTL/TVC |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL & LVTTL |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74GTL16612DLG4 Overview
Embedded in the SSOP package, it is available for you to use.This package has the format of Rail/Tube.Usually, when a transmission line is terminated, there are 56 termination points used.This device is powered by a supply voltage of 3.3V which is applied to it.There are 56 pins on this device.In addition, it is designed with a pin number of 56.The design of this electronic part contains 18 bits.Voltages up to 5.25V can be supplied.There is a minimum supply voltage of 3.15V for it.Using the method of Surface Mount, this electronic component is mounted.I would classify it as part of the group of Bus Driver/Transceivers.As for the logic IC it uses, it is a REGISTERED BUS TRANSCEIVER.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.Despite the fact that it is an electronic device, it belongs to the GTL/TVC family.There are no external factors that affect it, so it consumes 12μA quiescent current.Level translators operates from a 3.35V power supplies.Also, TRANSLATES BETWEEN GTL LEVELS AND LVTTL OR 5V TTL LEVELS characterize it.In order for the system to operate properly, the operating temperature should be higher than -40°C.A temperature below 85°C should be used for operation.In total, it has 1 elements.Featuring a 64mA output current, its design flexibility is maximized.95MHz is the maximum frequency that can be achieved.
SN74GTL16612DLG4 Features
SSOP package
56 pin count
56 pins
3.35V power supplies
1 elements
SN74GTL16612DLG4 Applications
There are a lot of Texas Instruments SN74GTL16612DLG4 voltage translators & level shifters applications.
- Handset
- Controlled Baseline
- Public Signage
- Routers (routing equipment)
- Available in Military (–55°C/125°C) Temperature Range
- Eliminate slow or noisy input signals
- Industrial
- Signaling Level Conversion for Clock or Data
- GPIO
- Personal Electronics