SN74F377AN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latch |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 6.5 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 72mA |
| Current - Output High, Low | 1mA 20mA |
| Max I(ol) | 0.02 A |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 90mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F377AN Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). The Tubepackage contains it. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. Through Holemounts this electrical part. The JK flip flop operates at a voltage of 4.5V~5.5V. In the operating environment, the temperature is 0°C~70°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74Fseries of FPGAs. Its output frequency should not exceed 125MHz Hz. The list contains 1 elements. As a result, it consumes 72mA of quiescent current without being affected by external factors. There have been 20 terminations. The object belongs to the 74F377 family. A voltage of 5V is used to power it. A device of this type belongs to the family of F/FAST. This electronic part is mounted in the way of Through Hole. The 20pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchfor the RS flip flops. It is designed with 8bits. The superior flexibility of this circuit is achieved by using 8 circuits. The system runs on a power supply of 5V watts. For high efficiency, the supply voltage should be set to 5V. This T flip flop features a maximum design flexibility due to its output current of 20mA. Furthermore, it has WITH HOLD MODEas a characteristic.
SN74F377AN Features
Tube package
74F series
20 pins
8 Bits
5V power supplies
SN74F377AN Applications
There are a lot of Texas Instruments SN74F377AN Flip Flops applications.
- Control circuits
- ATE
- CMOS Process
- Shift registers
- Circuit Design
- 2 – Bit synchronous counter
- Synchronous counter
- Single Down Count-Control Line
- Data storage
- Consumer