SN74F373DBR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74F373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Quiescent Current | 38mA |
| Turn On Delay Time | 8.6 ns |
| Family | F/FAST |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 55mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74F373DBR Overview
The 20-SSOP (0.209, 5.30mm Width) package contains it. Cut Tape (CT) is the way it is packaged. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Surface Mount is used to mount this electronic part. The voltage supply is 4.5V~5.5V. There is a temperature of 0°C~70°C at which the system operates. 74F is the series number of this FPGA. Electronic parts with 8 bits are designed for this application. The device consists of 20 terminations that are designed to be used in conjunction with it. The family in which it belongs to is 74F373. The device is operated when the supply voltage is set to 5V. The 20 pind are equipped with it. This electronic device is categorized as a F/FAST electronic device. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. This device has 2 ports. This part can be found within the FF/Latches subcategory. A total of 5V power supplies are needed to run it. It contains 8 input lines where electronic circuits are present. Its reliable performance makes it an excellent choice for TR. Its output current of 24mA ensures maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It consumes 38mA of quiescent current without being affected by external factors. When the maximum power current (ICC) is supplied for its operation, it reaches 55mA.
SN74F373DBR Features
20-SSOP (0.209, 5.30mm Width) package
74F series
8 Bits
74F373 family
20 pin count
20 pins
5V power supplies
SN74F373DBR Applications
There are a lot of Texas Instruments SN74F373DBR Latches applications.
- Control circuits
- Lamp and Display (LED)
- Serial Input
- Avionics
- Automotive ADAS
- Relay
- Flip-flops
- Parallel data synchronization
- Sample and hold register
- Programmable binary