SN74F299DWG4
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 15 ns |
| Family | F/FAST |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 95mA |
| Number of Input Lines | 10 |
| fmax-Min | 70 MHz |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
SN74F299DWG4 Overview
There is a SOIC package embedded with the device. Taking the total number of terminations on the chip and adding them up, we get 20. A Rail/Tube case is used to pack it. The part's operating supply voltage is rated 5V. In this device, there are 20 pins. As a general recommendation, mounting by Surface Mount is recommended. Electronic components belong to the F/FAST group. It's noted that the chip's operating supply voltage is in the range 5V. This section has the following additional features: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. A device with 10 input lines is available. There is a possibility of delivering voltage at 5V. There are 8 bits in the IC chip. It has a total of zero pins. Using it below 70°C is recommended. Operation of this device requires a value greater than 0°C. A voltage of 5.5V is used to supply this voltage. The supply voltage is higher than 4.5V. There are 1 circuits in this device.
SN74F299DWG4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74F299DWG4 Applications
There are a lot of Texas Instruments SN74F299DWG4 Shift Registers applications.
- Serial to parallel converter
- Dual-rank shift, hold, and bus applications
- 7-segment display control
- Remote control holding register
- Pulse Extenders
- Pseudo Random Pattern Generator
- Data Processors
- store data in digital form
- 8-bit data storage
- data manipulation