SN74F2373DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 66mA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7.3 ns |
| Family | F/FAST |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 3mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 9 ns |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74F2373DWRE4 Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. A package of Tape & Reel (TR) has been used. It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. The supply voltage of the device is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. An FPGA of this type belongs to the 74F series. This electronic part is designed with 8 Bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74F2373 is its family. It operates with a supply voltage of 5V. There are 20 pins on it. It is part of the family of electronic devices called F/FAST. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. This device has 2 ports on board, which are all available at the same time. This part can be found within the FF/Latches subcategory. There is a maximum voltage supply (Vsup) that reaches 5.5V. There is 5V power supply for it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. On the basis of its reliability, this device is well suited for TAPE AND REEL. The output current of 12mA makes it feature maximum design flexibility. A binary equivalent of the input line is generated by the 8 output lines.
SN74F2373DWRE4 Features
20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F2373 family
20 pin count
20 pins
5V power supplies
SN74F2373DWRE4 Applications
There are a lot of Texas Instruments SN74F2373DWRE4 Latches applications.
- PCs and Notebooks
- Bus system register with enable parallel lines at bus side
- Automotive Body Electronics
- Four-bit storage with output enable
- Decade counting
- General-Purpose Register
- Address register
- Buffer/Storage Registers
- Serial Input
- Shift Registers