SN74F2373DBRE4
| Parameters | |
|---|---|
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 66mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 7.3 ns |
| Family | F/FAST |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 3mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 9 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F2373 |
SN74F2373DBRE4 Overview
The package in which it is embedded is named 20-SSOP (0.209, 5.30mm Width). Tape & Reel (TR) is the way in which it is packaged. The output it is configured with uses Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. A voltage of 4.5V~5.5V is used as the supply voltage for this device. The temperature at which the machine is operating is 0°C~70°C. This FPGA is part of the 74F series. Electronic parts with 8 bits are designed for this application. This device has 20 terminations. The family in which it belongs to is 74F2373. It operates with a supply voltage of 5V. There are 20 pins on it. It is a member of the F/FAST family of electronic devices. The 20 pins are designed into it. Surface Mount is the method used for mounting this electronic part. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. It reaches a maximum supply voltage (Vsup) of 5.5V. A total of 5V power supplies are required for it to operate. Ensure that the supply voltage (Vsup) is greater than 4.5V. An electronic circuit can be found on 8 input lines. The reliability of this device makes it well suited to TAPE AND REEL.
SN74F2373DBRE4 Features
20-SSOP (0.209, 5.30mm Width) package
74F series
8 Bits
74F2373 family
20 pin count
20 pins
5V power supplies
SN74F2373DBRE4 Applications
There are a lot of Texas Instruments SN74F2373DBRE4 Latches applications.
- Shift right register
- Four-bit storage with output enable
- Automotive Cluster
- Shift left with parallel loading
- Buffer Storage
- Counting
- Network Switches
- Parallel Input
- Multistage ripple counting
- Communication systems