SN74F175NSR
| Parameters | |
|---|---|
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74F175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Output Current | 20mA |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 3.2 ns |
| Family | F/FAST |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 34mA |
| Current - Output High, Low | 1mA 20mA |
| Max I(ol) | 0.02 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
SN74F175NSR Overview
16-SOIC (0.209, 5.30mm Width)is the packaging method. The package Tape & Reel (TR)contains it. There is a Differentialoutput configured with it. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 4.5V~5.5V. Temperature is set to 0°C~70°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74F series. Its output frequency should not exceed 140MHz Hz. A total of 1 elements are present. As a result, it consumes 34mA of quiescent current without being affected by external factors. A total of 16 terminations have been made. The 74F175family includes it. A voltage of 5V provides power to the D latch. The electronic device belongs to the F/FASTfamily. It is mounted in the way of Surface Mount. This board is designed with 16pins on it. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. Its flexibility is enhanced by 4 circuits. This D flip flop is well suited for TR based on its reliable performance. In order for the device to operate, it requires 5V power supplies. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Its output current of 20mAallows for maximum design flexibility.
SN74F175NSR Features
Tape & Reel (TR) package
74F series
16 pins
1 Bits
5V power supplies
SN74F175NSR Applications
There are a lot of Texas Instruments SN74F175NSR Flip Flops applications.
- Modulo – n – counter
- Memory
- Storage registers
- Shift registers
- Data transfer
- Computing
- Clock pulse
- Matched Rise and Fall
- Dynamic threshold performance
- Convert a momentary switch to a toggle switch